Explore Household Repairs, Household Cleaning, and more!Drain PlugsSinksBathroom SinksHow To RemovePlugsTo RemovePorcelain SinkHow To GetPop UpTo GetBathroomPorcelainPopWe needed to remove the pop-up drain plug in our bathtub because it had become discolored. It used to be a chrome and silver color, but it had become chipped and showed a gold color that looks out of place and does not match the rest of the shower fixtures. It was not leaking or clogged, we just needed to replace it to match the rest of the bathroom. The pop-up drain plug will raise up and lower by pushing down or lifting up on the knob. We could not figure out how to completely remove it so we could replace it. The drain plug has a small knob on top and it would just spin and we were not able to unscrew it.We removed the pop-up drain cover using a pair of pliers. We wrapped a protective cloth on the knob to not scratch it when we applied our tools. It unscrews counter clockwise and we removed it fairly easily with the proper tool.

Our pop-up drain needed to be in the “down” position to be unscrewed. Your bathtub drain plug may disassemble in a different way. You may need to use a pair of pliers to hold the stem that is located under the drain cap. Then with another pair of pliers, unscrew the top cap. Some drain plugs need to be fully “up” and some need to be in between the “up” and “down” position top lock it in place for removal. Some bathtub drains have a small screw located in the side of it that needs to be loosened first. So depending on your type of bathtub drain, remove it according to the type. Once removed, replace it with the new bathtub drain kit.Once the drain cover is off, you will need a special tool to remove the complete drain assembly If you need to remove the complete bathtub drain assembly, you will make your life easier with the proper plumbing tool. The tool is called a “Tub Drain Wrench” and fits right into the drain to make it very easy to unscrew and remove.This tool is called a Tub Drain Removal Wrench and is needed to easily remove your bathtub drain assemblyThe drain removal tool will not scratch fine finishes.

It can be turned with a common adjustable wrench extension or heavy duty screwdriver. As a bonus, this tool will also remove / install toilet seat nuts. A brand new tub drain kit will look similar to this and will give your tub a nice new clean lookHere are some bathtub drain kits that can be purchased online. Red Nose Pitbull Puppies For Sale In MassTry to find the same manufacturer of the one you are replacing to make the job easier. Wedding Dress Rental In Washington StateMost kits include everything needed to completely replace the drain assembly and overfill plate. Wholesale Used Tires Distributors In AlabamaSo if you have an old discolored bathtub drain and overfill plate, consider replacing it with a brand new one.

This video will show you how to easily remove a pop-up bath drain.Please Share Our Helpful DIY Information Age 18-24 25-34 35-44 45-54 55-64 65 and older Gender Male Female Verified purchaser Had a tub drain that wouldn't hold the stopper any longer because the center threaded portion had corroded away from the caustic water in Buckeye, Arizona. The drain plugs are sealed in to the tub bottom pretty well to prevent bath and shower water from leaking under the tub and causing who knows what damage. I just followed the instructions on the package and tapped the Extract tool into the tub drain. The Extractor has a decent amount of taper so should fit most all 1-1/2" metal drain holes. I used a 1/2" drive extension and ratchet to remove the drain, but you could also use a crescent wrench or a combination wrench on the Extract tools hex. The drain unscrewed pretty easily and was removed without much effort. On the new drain plug, I put about three to four wraps of Teflon tape on the the entire thread length.

I then used GE Premium Waterproof Silicone II Sealant, which I use exclusively in kitchens and bathrooms. The 2.8 OZ, tube is plenty. Let dry for 24 hours, and the job is finished. The Drain Extract Tool is one handy device and saved tons of time over drilling and banging out the old metal tub drain. Yes (1) No (0)  Report Yes (1) No (0) Verified purchaser Verified purchaser I used the Drain Extractor per instruction with no problems. Got the broken drain out easily. Save your self a plumber bill with this super sized E-Z out. Yes (0) No (0)  Report Yes (0) No (0) Verified purchaser I bought this tool because when attempting to remove the drain from my tub the cross hairs broke. I hear this is a common problem. Then got this tool and inserted into the drain and tapped into place with a hammer. The only problem was the tool wouldn't really stay in place, wobbling side to side, and I was afraid to hammer it too hard. Wasn't really a problem as long as you apply downward force on the tool while applying counter clockwise torque.

(I used a half inch breaker bar and half inch extension). The drain came right off. Yes (6) No (1)  Report Yes (6) No (1) The cross bars had broken due to calcification so i purchased this extractor to remove and id worked great! Yes (5) No (0)  Report Yes (5) No (0) If the crosses inside the drain break off, this is the only tool I know of that can remove t he drain. I suppose t here could be something else out there but this is a no brainer. It worked as I expected. It will help if you run hot water over the old one first to help soften the old putty and the old drain will come out pretty easily. Yes (4) No (0)  Report Yes (4) No (0) On the surface this seems like it would be a good tool for its purpose, however it did not fit the drain that it was intended for. I'm certainly no expert, but I assumed that if it doesn't suggest different size variables, than it's a generic size and should have fit. It didn't fit either the old drain or the new drain. Great idea, but a waste of $20.00.

Yes (1) No (1)  Report Yes (1) No (1) Tap it in with a hammer and use a 1/2 inch drive socket wrench and short extender to remove your drain. There is a very good YouTube video that shows how to use this. Do a search on "how do you remove a broken bath tub up drain". Yes (3) No (1)  Report Yes (3) No (1) Had a drain with the t broke out. Tired every option to remove it. With this tool it was easy. Old drain has putty on threads, that's why it would not move with any other options. Yes (1) No (0)  Report Yes (1) No (0) Does what you need it to do Yes (1) No (0)  Report Yes (1) No (0) It wasn't until after I got the drain out that I could see the person who installed the tub originally epoxied it into the tub. No wonder when trying to remove it all the cross members broke. I made sure everything was dry, pounded the tool into the drain with a hammer and connected my 1/2 in drive socket and extension into it. After a prayer that it would work it came out no problem.