Removing Old Vinyl Flooring Adhesive

How to Remove Vinyl Flooring There are lots of reasons why you may need to get your vinyl flooring removed. Although vinyl floors are truly long lasting and durable, they can get damaged over time due to wear and tear. As such, homeowners may also need to replace the old vinyl flooring since it is unsightly and out of date. But whatever your reason for removing the vinyl floors, it is important to keep in mind that the steps on how to remove vinyl flooring will take up a lot of time and will require utmost patience for it to be done correctly. You can choose to hire a professional to get the vinyl flooring removed but if you are trying to save money, then you can simply do it on your own. It is important to be very careful not to damage the subfloor that is right underneath it because it will be necessary to repair any damages right before you lay down the new vinyl flooring. The first thing that you will do is to clear off the clutter in your room or in the area where the vinyl flooring is located.

Remove all of the furniture and furnishings in your room. On this step of how to remove vinyl flooring, you may need the assistance of another person who can help you with carrying and lifting the furniture especially the big ones, such as the bed, cabinets, sofa, appliances, etc. The next thing that you will do is to remove any trim right along the floor and this includes the baseboards. If you are thinking of salvaging the trim so you can use it again, make use of a flathead screwdriver in prying the baseboards and trimming away from the wall on the sections.
Rent Patio Furniture AustinWhen doing this, make sure that you remove any of the nails and then set the trim aside.
Cheap Quirky Prom Dresses Remove the Nails, Tracks and Staples
Cheap Truck Rental Miami

The next step on how to remove vinyl flooring is to check along the edge of the vinyl flooring and see if it has been tacked, stapled or nailed right along the edges. If you notice any nails, tracks and staples, slowly pry them off the vinyl with the use of a small pry bar and a claw head hammer. You have to take off the nails, the tracks and the staples from the entire edge of the vinyl flooring right before you pull it up further. Discard these items safely so that others will not end up stepping on them. Remember that vinyl is often glued in place using adhesives. The next thing that you will do is to check right along the corners of the vinyl and look for a place where the vinyl floor was not glued down. Make use of a utility knife or a floor knife in cutting the strips off the flooring that’s about 12 inches in width. Make use of the strips to slowly pull off the vinyl flooring. Then grab the scraper and use it to pull off any areas that are often difficult to remove because of the presence of glue and adhesive.

For those areas that are really stubborn and are a bit difficult to remove, you can spray a mixture of water and soap directly to the adhesive. Allow the mixture of water and soap to be absorbed and then with the use of a scraper, pull off the vinyl away from the adhesive. As you go on with the job, slowly remove as much adhesive and glue as possible. The next step on how to remove vinyl flooring is to clean off the floor well. Cleaning the floor should be done right after the majority of the vinyl flooring is taken off. With the use of a heating gun or a hair drier, soften up or loosen any of the adhesives or glue that is on the floor. As soon as all of the vinyl floor and the glue or adhesive has been taken out, the next thing that you will do is to vacuum the floor again. Examine the subfloor carefully to check if there are any damages that have taken place during the process of removal. Or perhaps there are already some damages that have taken place right before you have gone through the steps of how to remove vinyl flooring.

If you want to make the job even easier, the best option is to rent a power scraper. This machine can quickly and easily remove the vinyl flooring in your home, such as in the kitchen and bathroom. Using the machine can certainly make your job to become even easier and you will not end up with sore arms, hands and back unlike if you do it manually. When using the power scraper, make sure that you use a ceramic tile blade for it. Using a power scraper with ordinary blades is not a good idea as it will not be able to stand up to vinyl tiles. There are some companies that offer these machines for rent and they will accept an optional tile chisel. If the rental store will offer this feature, simply remove the wide scraper blade of the machine and then slide the chisel attachment. Secure it with a bolt and a washer and then fire it up, allowing the machine to do all the dirty work for you. The process of how to remove vinyl flooring is just easy, but make sure that you have the necessary tools and materials in order to get the job done the right way.

Among the tools that you will need are the utility knife, scraper, floor knife, soap, water, hair dryer, heat gun and a vacuum or shop vac. If you are using the power scraper, you will also need a straightedge as well as a utility knife, aside from the machine itself. Project: Strip an Antique Project: Remove Wood Stain Project: Strip Stubborn Paint 1 gallon will strip from 80 to 100 sq. ft. Chemical splash glasses must be worn whenever there is a chance of a chemical splash or spray. They can be obtained at most home centers and hardware stores. Most chemical resistant gloves withstand exposure to solvents and other chemicals and withstand tears and punctures. Always read and follow the glove manufacturer’s instructions before use. It’s a good idea to purchase several pair at your home center or hardware store and change out as needed. Long-handled sidewalk scraper or floor hoe Utility knife (if removing vinyl flooring) Stripping brush (for working small areas)

Heavy plastic drop cloths (6 mil recommended) 1. Read The Instructions Always read all cautions and directions on the product label before beginning a project. You should understand all aspects of the project before you begin. You can also print this project plan and bring it along with you to the job site. 2. Prepare The Work Area For best results, use chemicals in temperatures between 65° and 85° F and away from strong breeze and hot sun. Stripping large areas such as floors has the potential to result in high levels of potentially hazardous vapors. Working within a small area at a time makes the job easier and decreases hazards. Vapors tend to collect along the floor, so do as much work as possible using the long-handled tools to avoid bending and crawling. If working indoors, open all windows and doors and maintain a cross ventilation of moving fresh air across the work area. 3. Ready To Begin When you are ready to get started, put on your chemical splash goggles and chemical-resistant gloves.

Make sure your mop is within easy reach for quick cleanup of any splashes during the project. Having trouble or looking for a way to make your job go faster and easier? Ask the experts at your local home center or hardware store for advice. They’ll be happy to provide tips and recommend the right tools for the job. The Easier Way To Remove Tough Glue. Often, the toughest part of putting in a new floor is removing the old one. With the right tools, a few tips and Klean Strip® Adhesive Remover, you can do it. Klean-Strip® Adhesive Remover reverses the adhesive chemistry to soften it — so you can loosen and remove the glue and prepare a clean, smooth surface for your new one. Step 1: Pull Up Linoleum, Tiles or wood flooring There is often rock hard old glue standing between you and a new floor. If covered over, these adhesives could cause problems in the new floor covering. The good news is that old floor glue can almost always be removed by reversing its chemistry to soften it.

Step 2: Apply The Remover Pour 1-1/2 pints (2-3 cups) over a small area no larger than 9 sq. ft. You can pour it directly from the original container. Step 3: Cover The Remover Lay a heavy plastic drop cloth over the puddle of Klean-Strip® Adhesive Remover. This allows you to spread the material more easily, but it also prevents the Adhesive Remover from evaporating prematurely. Step 4: Spread It Evenly Use a long-handled paint roller on top of the plastic with very little pressure to spread the Klean-Strip® Adhesive Remover under the plastic, just to the edges. Do not step on the covered area as plastic may become slippery. Leave the area and let the remover do the work. Do not allow the stripper to completely dry on the surface as the adhesive can re-adhere. After 15-30 minutes, you should start to see the chemical reaction happening. The glue will start to bubble up and swell, and this will show that the finish is separating itself from the surface.