Our 1 1/2"- and 2"-wide vinyl strap can be custom-cut and holes punched. This US-made commercial grade vinyl contains ultra violet inhibitors and has a matte finish. See how to measure and install pre-cut vinyl straps and the selection of strap colors in the color chart. Vinyl samples will help in selecting a color. Pre-Cut 1 1/2 Vinyl Straps Pre-Cut 2 Vinyl Straps Rivet - Long Shank Rivet Rivet - Short Shank Rivet Rivet - Solid Shank Double-Wrap Rivet Rivet - Small Double-Wrap Rivet Multi-Gauge Single- and Double-Wrap Rivet Large Solid Shank Double Wrap Rivet 5/8 Aluminum E Clip 1/2 Aluminum S Clip Stainless Steel Pilot Point Screw Windward strap furniture is made with 2" wide virgin vinyl and is double wrapped for ensured strength and durability. It is also specially treated with UV inhibitors for added sun protection and comes in a variety of colors, making it a perfect choice for both commercial and residential environments.

Our 1 1/2"- and 2"-wide vinyl strap for patio furniture is available in rolls of 50, 100 and 200 feet. See how to how to measure and install straps and our selection of vinyl strap colors. Vinyl samples will help in selecting a color. 1 1/2 Vinyl Strap (50-Ft Roll) 1 1/2 Vinyl Strap (100-Ft Roll) 1 1/2 Vinyl Strap (200-Ft Roll) 2 Vinyl Strap (50-Ft Roll) 2 Vinyl Strap (100-Ft Roll)Accent Vinyl Straps add a splash of color and interest to any Strap furniture collection. Tropitone pioneered the technique of double-wrapping vinyl straps around the aluminum frame for extra durability that continues today. Available numerous color selections, each strap is treated with special additives to resist fading so that your strap outdoor patio or pool furniture looks like new, year after year.How do you clean vinyl straps on patio furniture? Vinyl straps on patio furnishings can be cleaned using a soft cloth and warm, soapy water. Very dirty, mildewed or stained patio furnishings can be cleaned with ammonia and warm water.

Most outdoor furnishings can be cleaned in under an hour. What can you clean old vinyl records with? How do you clean finished wood furniture? How do you remove mildew from finished wood furniture? Mix the cleaning solutionIn a bucket or a small container, mix 1/4 cup mild liquid soap and a gallon of warm water. Does Laminate Flooring Work In BasementsVery dirty vinyl straps, or those exposed to acid rain and other severe weather elements, can be washed with a mixture of 3 cups of warm water and a cup of ammonia. Patio Furniture RehabWash the strapsUse a soft cloth to wash each strap, making sure to lift crosshatched straps and remove dirt and debris under the top sections.Nike Air Jordan Shoe Box StorageRinse the furnishingsA garden hose can be used to rinse the cleaning solution off the patio furniture.

If ammonia is used to wash the furniture, rinse it away in an area with excellent drainage to ensure that the ammonia doesn't harm the lawn or other underlying surfaces.Allow the furnishings to dryAllow patio furnishings to air dry on sunny days, or remove the excess water with a clean, dry towel before using or storing the furnishings. What are some good ways to clean lacquered furniture? To clean lacquered furniture, damp a cloth in warm water and mild soap. Wring the cloth well. Wipe the furniture gently in a single direction, and then use... How do you clean vinyl windows? Vinyl windows should be cleaned with a mild soap, such as baby shampoo, or a weak mixture of vinegar and water. Use a soft cloth, sponge or soft bristled b... What are some benefits of vinyl place mats? Vinyl place mats usually serve for a long time, and their cleaning process is easy and requires only a wet cloth. Some types of vinyl mats are resistant to... How do you clean patio cushions?

To clean patio cushions, spray them with a solution of dishwashing detergent, borax and water, rinse the cushions with clean water, spray them with a fabri... How do you clean a fiberglass tub? What are some ways to clean a home's sandstone exterior? What products are good for cleaning fiberglass tubs? How can someone clean a pillow top mattress? What are the easiest ways to clean brass? How do you clean vertical blinds?Today’s post is about how to restrap commercial pool furniture – the type that uses colored vinyl straps. Pool chair straps generally last 5 years or more before they weaken. Don’t throw out that chair or lounge – do a pool chair strap repair! Pool and lawn chair strapping comes in two widths and 10 colors to match most outdoor furniture and are made of 100% virgin vinyl to last for years. Each roll contains 200 feet, or about 90 straps. Use scissors to cut through the vinyl strapping to be replaced. Unwind them from the chair or chaise rail and pop out the rivets with a sharp pull on the end of the strap.

Use a small screwdriver or pliers to remove any remaining rivet pieces. TIP: Bolt down the chair or place sand bags on bottom rails of chaise lounge chairs, to keep it securely in place while you work. Most vinyl pool chairs and patio chairs use a double wrap on the frame and the strap wraps around the frame twice, but some outdoor chair straps only wrap once around the frame. For a double wrap chair or chaise, hold a cloth measuring tape over the rivet hole on one side, wrap it twice on that side, and pull it across and wrap it twice on the other side, and take the measurement at center of the other hole. Pull the measuring tape tight to get a good hole to hole measurement (plus the one or two wraps around the frame).  Now – because the vinyl straps stretch tightly, subtract 15% of the measurement. For example, if the total hole to hole (plus wraps) measures 33″, cut the straps to 28 inches (33″ x 0.85 = 28.05″). TIP: Measure twice and cut once! Install a few straps to be sure the length and tension is correct.

After cutting vinyl straps to the right length, use some good scissors to dog-ear the ends, cutting off the corners on each end with a 45° wedge cut. Then use a drill bit to place a hole in the end of each strap, in the center, near the end. Push in a new plastic rivet through the hole on each end, both facing the same way. TIP: Use heavy duty scissors to cut the corners, and a 3/8″ drill bit to cut a clean hole, 1/4″ from the end. Heat the vinyl straps in water that is about 200°, on a stove top or gas grill, in a large steel cooking pot. Don’t allow the water to boil, but keep it just below bubbling. Add 2-3 straps at a time, allowing them to soften for 2-3 minutes in the hot water. TIP: Don’t wear colored gloves, which can bleed their colors from contact with the hot water. Use tongs or gloves to pull out one strap and immediately install it before it cools. Pop-in the rivet on one side, wrap it twice around the rivet and stretch it to the other side, but not over the hole, so you can wrap it twice and push in the other rivet.