How To Fix A Ceiling Fan Light Switch Pull Chain Your ceiling fan has a broken light pull chain. How do you fix this fast and easy? Ceiling fans with lights have a pull chain to turn the fan or the lights on or off. These pull chains get pulled on daily and can be broken. If you pull too hard on the pull chain the chain can break or come out of its socket. Also, the light switch itself may wear out or fail. If this happens the lights will not turn on. We will show you the easiest way to fix either of these problems below. Since you are working on your ceiling fan, find out the best ceiling fan direction for Summer or Winter.Below are 2 different scenarios, one is a broken pull chain and one is a bad switch. Always turn off power before taking apart a ceiling fan or light switch.Pull chain for a ceiling fan light switchTo replace the fan light switch pull chain: The switch housing needs to be removed.Unscrew the screws holding the lighting assembly to the fan.You should now see the light switch and where the pull chain has broken.

Unscrew the pull chain assembly from the switch.If needed take the pull chain to your nearest hardware store and match it up with a new one.The new pull chain can be installed by screwing it on as the old one was taken off.Put everything back together and test the pull chain.Service Oriented Architecture Question Bank With AnswersInternal on/off switch for a ceiling fan light To fix and replace a bad on/off light switch inside the ceiling fan:Remove the light fixture housing from the fan.Semi Truck Tire Size ChartUnscrew the screws where the light fixture attaches to the fan assembly.Can You Burn Laminate Wood FlooringThe small switch where the pull chain attaches should now be visible.Remove the old switch.

If needed take it to your local hardware store and match it with a new one.Install the new switch with the pull chain through the housing and tighten the connection.Both of these repair methods are common solutions to fix pull chains and pull chain switches. Most people can fix this within 30 minutes with just the basic tools on hand. EASY ceiling fan pull chain repair videoPlease Share Our Helpful DIY Information Previous post: 36 Recycled Scrap Metal Into Furniture Project IdeasNext post: 30 Fantastic DIY Wooden Pallet ProjectsThere are many “universal” ceiling fan remote control kits on the market for overhead fans controlled by pull chains and a singe wall switch. All of them feature on/off and light-dimming and thermostatic control can use a ceiling fan remote kit depends on the amount of free space inside the fan canopy. Many “ceiling hugger”–style fans have enough free space for the receiver for the ceiling fan remote. But “down-rod” styles may not.

Shut off the circuit breaker to the fan and lower the canopy (use a voltage sniffer to make sure the power is reallyCheck the fit of the receiver before you commit to wiring it in permanently. Keep your receipt just in case. With the power off, connect the hot and neutral wires to the “AC-in” wiresThen connect the three remaining wires to the fan and light (they’re labeled by the manufacturer). If you have neighbors nearby, you may have to change the frequency on the ceiling fan remote transmitter and receiver to prevent you or your neighbors from controlling one another’s fans (see Photo 2). Hunter Bellwood 52" Ceiling Fan Shipping & Handling included* Premier Bronze FinishIncludes Remote ControlWhisperwind® Motor The estimated delivery time will be approximately 10 - 15 business days from the time of order. Standard shipping via FedEx Ground is included in the quoted price. The estimated delivery time will be approximately 10 - 15 business days from the time of order.

*Delivery is available to Alaska, Hawaii and Puerto Rico. An additional Shipping and Handling fee will apply to shipments going to Alaska, Hawaii or Puerto Rico. This fee will be quoted at checkout. Additional transit time may be required. products can be returned to any of our more than 600 Costco warehouses worldwide. If your order was delivered with "Curbside", "Threshold" or "White Glove" service, please advise Customer Service if you have disposed of the original package so that they may request the appropriate service for pick up. Manuals, Information & GuidesHarbor Breeze Ceiling Fan - Loud enough to not use itI have a hampton bay fan model (from sticker on top of motor) TDC1152BP5LKLRC, and the lights stopped working on them. The fan still works fine, just the light. I replaced the battery in the remote, changed the codes around, changed the bulbs, pulled the chain, hit diff switches and i just went and bought the hampton bay universal remote setup and same thing fan works light dosent.

Any help is greatly welcome! Hello edelbrock231 and welcome to The Thank you for including such detail inYou have been diligently trying to get the lights to work again and I want to help you. I spoke with Hampton Bay Customer Service and they need more information to identify your ceiling fan.  There should be another sticker on top of the motor housing with a 12 digit UPC code (all numbers – no letters).  If you still have the packaging – there is a 6 digit SKU (numerical) from the side of the box. The 12 digit UPC code will identify the exact manufacturer and model of the fan. This will help the troubleshooting process.  There may be several issues that have stopped the lights from working and identifying the model will facilitate the solution.  The Hampton Bay Customer Service team can be reached at 1-800-654-0688 directly for fastest assistance. Best wishes and please keep us posted Hello Newtothis and welcome to The Community!

Thanks for the important reminder to always disconnect the power (turn off the circuit breakers to the outlet box and associated wall switch location). We are glad you are on The Community. I have windward II and light goes on and off when ever it wants to.  Fan still works so I think it's not the connection problem.  The problem started on my second bulb after 2 years.  I replaced the bulb and still has the same problem.  It would've been nice if the owner's manual has what wattage bulb it needs.  my replacement bulb is 30W. Hello joonjhl and welcome to The Community!  We are glad that you have joined the discussions. There may be several reasons why the light goes on and off whenever it wants.  But I will need some more information to help get to the bottom of this situation.  Can you locate the sticker on top of the motor housing with a 12 digit UPC code (all numbers – no letters)?   This will help us identify the exact manufacturer and model number of the fan and facilitate the troubleshooting process.

Did the unit originally come with a remote control?  The remote (if there is one) may not be properly communicating with the receiver. Is there a dimmer switch attached to the light? What types of bulbs are being used in the ceiling fan (CFL, fluorescent, incandescent)? I look forward to helping you solve this problem and keeping the lights on (or off) as you want them to work. Hello, my Hampton Bay ceiling fan light will not work either. It's a Springview model and I have a switched outlet for both fan and light. From my light switch I have both black and red hot wires and they are both working with my tester. I have hooked up white to white, black to black, green to green and red to blue (blue is the light wire on the fan). After that, I have attempted every possible combination of hot wire connection (red or black to blue capping the unused hot), switched or unswitched using the pull chain only and nothing. The fan itself has worked with every combination with either switch no problem.

After many hours I am about to box it up and return it unless you have some suggestions. The only number I see on the fan motor is 14920/1/2. So did we ever find out what happened? I have a Hampton bay south wind v 52in ceiling fan. I installed it just over a year ago. It's worked fine with the remote for about a year. About a week ago my light just turned off. I hear a little click and it shuts off. If I flick the switch off and then back on the light stays on for a bit then shuts off. May fan keeas working regardless... Ay idea on what it could be... I noticed the same behavior: fan works continuously, lights cut out after indeterminate amount of time.  Shut off switch, give it a second, lights work... then cut out.Only have remote to operate the unit, and no problem with connectivity - switch, fan base or socket.  Hot at all connections.Realized problem was with the CFL bulbs.  Since they don't dim, can't identify "high or low" dim level. Not sure if this is an overload issue, but replaced with incandescent and immediately worked properly.